Tips To Fix Bluetooth Not Working In iOS 12

Many iOS users have complained that the Bluetooth on their device hadn’t been working properly since they updated to iOS 12 version. Their iPhone frequently disconnects from Bluetooth accessories and even it refused to connect to the Bluetooth devices.

If you are in the same trouble with Bluetooth on your iOS 12 iPhone/iPad, then this post will share with you possible solutions to help you fix Bluetooth not working on your iOS device.

How to Fix Bluetooth Not Working Problem in iOS 12

Simply do the following solutions and they can help you resolve it.

Give a Fresh Stance to Bluetooth

In many cases, you can bring Bluetooth back to work just by refreshing it. Some people have found success by following this trick. So, you’d better try it out first.

Step 1: Launch Settings app → tap on Bluetooth and toggle it off.

Step 2: Now, reboot your device.

On iPhone 8/8 Plus, X: press and quickly release volume up button. Next, press and quickly release volume down button. Finally, press & hold the Power button until you see Apple logo on the screen.

On your iPhone 7/7 Plus: simply press & hold the Power and volume down buttons at the same time.

On older iPhone and iPad models: press and hold the home and side buttons simultaneously until Apple logo appears on the screen.

Step 3: Once your iPhone/iPad has rebooted, enable Bluetooth again.

Check if the problem should be fixed now and you have got success with it.

Disconnect Your iPhone from All Accessories and Try Connecting Them Again

There is another trick that is available for solving the Bluetooth issues is making your iPhone forget the particular device and then connect to it again. To do so:

Step 1: Launch Settings app and tap on Bluetooth.

Step 2: Tap on the “i” button near the connected device. Next, tap Forget this Device and confirm your choice.

Step 3: Next, disable Bluetooth.

Now, restart your device as mentioned above. Once rebooted, re-enable Bluetooth and try connecting to the accessory again.

Also see: How to Fix the Wi-Fi Not Working in iOS 12

Reset Bluetooth Accessory

Sometimes, the problem could come from your Bluetooth accessory. So, make sure that it’s got enough juice to work properly. If there is a sufficient power and it’s not able to connect to the iPhone, you should try resetting it to factory default. The process is different, based on device.

Reset Network Settings

Resetting the network to the initial state is one of the most reliable tips to get rid of the Bluetooth connectivity issues. Therefore, you should also give it a go as well. Keep in mind that it will remove all the Wi-Fi passwords. So, ensure that they are available.

Step 1: Open Settings app →tap on General → Reset.

Step 2: Now, scroll down and tap on Reset Network Settings, and enter your passcode when prompted.

Once your device has successfully restarted, the problem will likely go away. However, if you are still staring at disappointment, you should think about resetting the entire settings. It’s a radical step, but it’s worth having a try to get the fix.

Step 1: Go to Settings → General → Reset.

Step 2: Now, tap on Reset All Settings and enter your password when prompted.

These are some possible solutions to fix Bluetooth issues on iOS version. If they work for you, let’s know in the comment below.


Be the first to comment

Leave a Reply

Your email address will not be published.


This site uses Akismet to reduce spam. Learn how your comment data is processed.